Flow and Scour Near an Abutment
Laboratory experiments were used in conjunction with a two-dimensional depth-averaged numerical flow model, RBFVM-2D, to investigate the relationship between flow velocity distribution...
Computation of Flow Past a Cylinder Mounted on a Flat Plate
The surface shear stress distribution in the vicinity of a circular cylinder - mounted normal to a rigid flat plate - produced by the three-dimensional flow past it, is investigated numerically...
Velocity Downstream of a Submerged Pipe Outlet
The velocity downstream of a submerged pipe outlet was examined in time and space. A model study was performed to examine the influence of boundary roughness changes on the velocity dissipation....
Shape Effect on Bed-Load Transport in Pipes
The nature of part-full flows in pipe sewers produces different channel shapes resulting in non-uniform shear stress distribution on the wetted perimeter. New experimental data were utilized...
Numerical Modeling of Unsteady Compound Channel Flow
The unsteady open channel flow equations describing conservation of mass and momentum (St. Venant equations) are integrated numerically to determine the depth of flow and the rate of discharge...
Hydraulic Modeling of Fish Screens
Hydraulic model studies coupled with available knowledge of fish behavior can be important component in the development of fish-screening systems. To reproduce in a model the flow field...
Wind Induced Circulation in Shallow Lakes
Clear Lake is a relatively shallow lake in Northern California. Natural flows are small but at times they do transport heavy metals into the lake. In order to predict water quality constituent...
Bed Shear Stress in Unsteady Open-Channel Flows
In this study, velocity distributions over smooth and rough beds were accurately measured with an LDA in unsteady open-channel flows. The log-law distributions yielded well in the wall...
Acoustic Doppler Current Profiler for Inlet Current Measurements
A BroadBand Acoustic Doppler Current Profiler (BroadBand ADCP) was used to survey tidal currents at Shinnecock and Moriches Inlets, Long Island, NY. Measurements were made remotely form...
Turbulent Velocity Flutuations in Natural Rivers
The longitudinal and transverse components of flow velocity, as well as the normal and tangential stresses, must be expected to fluctuate with time and space when flow at a high Reynolds...
Time-Dependent Landslide Probability Mapping
Case studies where time of failure is known for rainfall-triggered debris flows can be used to estimate the parameters of a hazard model in which the probability of failure is a function...
Rainfall Depth-Duration-Frequency Analysis for Major Cities in Taiwan
The annual series of extreme rainfall amounts for various durations are compiled. The statistics such as mean, standard deviation, coefficient of variation, coefficient of skewness, and...
A Simple Finnish Method for the Structural Fire Design of Composite Structures
The structural fire design of composite structures in Finland has previously been based on furnace tests, which are expensive and take too much time to arrange. With the increasing prominence...
Infrastructure Damage Modeling with GIS
This paper describes the use of a geographic information system to model damage to a municipal water distribution system. In a demonstration application detailed attribute data on components...
Image Enhancement: Application to Geotomography
Image enhancement complements geotomographic reconstruction in the rendering of better images. In this paper, available image enhancement techniques are reviewed. Emphasis is given to...
Active Guideway Systems
Many automated people movers which have been developed or studied in France or in other countries belong to the category of active guideway systems. This paper describes characteristics...
On Distributed Processing Applications in Finite Element Analysis
Computer architectures may be classified by the relationship between their instruction and data streams (SISD, SIMD, MISD, MIMD) and the locality of memory (shared, local). Distributed...
Random Aspect of the Stress Inside Granular Media
Micromechanics of granular media arose from the necessity of a better understanding of the relationship between the global behaviour of such materials and the physical phenomena which...
Use of Hierarchical Lattices for Predicting the Fluid or Stress Transfer in Concrete
Hierarchical lattices are used to study the influence of local disorder on the transfer of properties (stresses, strains, permeability) from the micro-scale to the macro-scale. They are...
On the Diffusional Stress Transmission
A probabilistic diffusional mechanism for the propagation of intergranular forces has been formulated as a set of three mathematical assumptions. The equilibrium equations are complemented...
Return to search